Expa Cool is a 100% Acrylic High Built Exterior Paint: British Paints

Expa Cool

Expa Cool is a 100% acrylic high built exterior paint made to international standards that keeps exteriors looking bright and new for many years. Expa Cool is a high performance architectural coating for all types of construction residential building, offices and commerical complexes. Expa Cool is a 100% pure acrylic emulsion, with tough adhesion and flexibility, its lightfast chemical resisting pigements and other special additives, provides protection against alkali, U.V degradation, fungal and algae growth.

Technical Data

Areas of Application Cement Plaster, Concrete Stone, Brick Asbestos, Cement Sheet & all types of Building Boards

CautionNot recommended on lime wash

Viscosity of Supply 10 ± 2 Ps/Rotothinner/30°C

Thinner Municipal/Potable Water

Thinner Ratio Paint : water 100:40 by volume for each coat

Method of Application Brush/Roller

PrimerOn highly absorbent or chalky surface, apply a coat of Expa Cool Advanced Hi-Sheen Exterior Emulsion thinned with water (1: 1 by volume ) as a self-priming coat or Exterior Wall Primer to reduce surface porosity and thereby reducing the degree of absorption of subsequent finish coats

Spreading Capacity 60- 65 sq. ft./ ltr./2 coats

Drying TimeSurface dry maximum 1 Hrs. (28°- 30°C & 60 ± 5% R.H.) Re-coating period minimum 4 Hrs.

Finish Hi-Sheen and Smooth

Shades Available As per Shade Card

Technical Sheet

You Imagine, We Create

Imagine the possibilities as we’re all set to inspire creativity by putting a colourful spell on your home.

Better Performance

Promise of a durable performance regardless of any surface.

Cool Surface

Cool Surface by Upto 5C (Applicable to White & Light shades only)

Excellent Algae Resistance

Preventing your walls from turning dirty green during rains.

Excellent Fungal Resistance

Helping your walls stay free off fungus through all seasons.

Rich-Sheen

A shine that does not wither with the weather.

Warranty

Inspiring Colour Palettes

If a home is a body, the colour is its soul. Turn any space from drab to fab with a splash of vivid shades.

Explore Our Catalogue

Choose from the Colour Gradients Below

*Explore our categories - Dark shades varies from product to product.

TAMALE RED

Colour Code 2126C

Locate a dealer

A Complete Colour Guide

Pick the Perfect Colour Tools to Transform your Home.

Directions For Use

Performance of Expa Cool Exterior Emulsion critically depends on surface preparation and application as outlined below:

Newly plastered surface should be painted with Expa Cool only after 2-3 month of curing of plasters.
Before painting the surface should be brushed free from dust, loose/ chalky particles, fungus, algae etc.
Previously painted surface with oil paint should be sanded thoroughly to make surface dull and matt for better adhesion, Surface previously coated with cement paint should be wire brushed and washed with water.
The first coat thinned should be applied at recommended dilution on moistened surface. It should be allowed to dry for minimum of 4 hours under normal weather conditions, before the second coat is applied at the same dilution.
Expa Exterior Emulsion can be brushed or rolled.

Note: Cooling of surface by up to 5 Degree C is applicable only for white and light shades only.

(The information in this leaflet is given in good faith. Covering capacity is indicated on the basis of results obtained on a prepared smooth surface).